Asus P5B-PLUS User Manual Download Page 17

Page: 17 / 172

ASUS P5B-Plus Series

1-1

1.1

Welcome!

Thank you for buying an ASUS

P5B-Plus Series motherboard!

The motherboard delivers a host of new features and latest technologies, making it

another standout in the long line of ASUS quality motherboards!
Before you start installing the motherboard, and hardware devices on it, check the

items in your package with the list below.

If any of the above items is damaged or missing, contact your retailer.

1.2

Package contents

Check your motherboard package for the following items.

Motherboard

ASUS P5B-Plus Series

I/O modules

1 x 2-port USB 2.0 module

Cables

Serial ATA power and signal cables for 2 devices

1 x Ultra DMA 133/100/66 cable

1 x Floppy disk drive cable

Accessories

I/O shield

1 x ASUS Q-Connector Kit (USB, 1394, system

panel; Retail version only)

1 x AI Remote kit

(Vista Edition for retail version

only)

Application CD

ASUS motherboard support CD

Documentation

User guide

Summary of Contents for P5B-PLUS













































































































































































Search results

Summary of Contents for P5B-PLUS

Reviews:

Related manuals for P5B-PLUS

Brands by name

Popular brands

Asus P5B-PLUS, User Manual

Search results

Summary of Contents for P5B-PLUS

Reviews:

Related manuals for P5B-PLUS

Brands by name

Popular brands