Asus P5B-PLUS User Manual Download Page 27

Page: 27 / 172

ASUS P5B-Plus Series

2-1

Onboard LED

The motherboard comes with a standby power LED. The green LED lights up

to indicate that the system is ON, in sleep mode, or in soft-off mode. This is a

reminder that you should shut down the system and unplug the power cable before

removing or plugging in any motherboard component. The illustration below shows

the location of the onboard LED.

2.1

Before you proceed

Take note of the following precautions before you install motherboard components

or change any motherboard settings.

• Unplug the power cord from the wall socket before touching any

component.

• Use a grounded wrist strap or touch a safely grounded object or

a metal object, such as the power supply case, before handling

components to avoid damaging them due to static electricity.

• Hold components by the edges to avoid touching the ICs on them.
• Whenever you uninstall any component, place it on a grounded

antistatic pad or in the bag that came with the component.

• Before you install or remove any component, ensure

that the ATX power supply is switched off or the power cord is detached

from the power supply. Failure to do so may cause severe damage to the

motherboard, peripherals, and/or components.

P5B-PLUS

P5B-PLUS Onboard LED

SB_PWR

Standby

Power

OFF

Powered

Off

Summary of Contents for P5B-PLUS













































































































































































Search results

Summary of Contents for P5B-PLUS

Reviews:

Related manuals for P5B-PLUS

Brands by name

Popular brands

Asus P5B-PLUS, User Manual

Search results

Summary of Contents for P5B-PLUS

Reviews:

Related manuals for P5B-PLUS

Brands by name

Popular brands