Asus P5B-PLUS User Manual Download Page 134

Page: 134 / 172

5-24

Chapter 5: Software support

5.3.9

AI Remote

With the ASUS AI Remote, you can play, pause, or adjust the volume on any songs

desired without leaving your sofa. Have AI Remote in your hand and do more with

your PC at a distance away.

Overview of the ASUS AI Remote

1. Power

5. AP-1/2 Trigger

2. Full Screen

6. AP Menu

4. AI Nap

3. AI Gear

7. Media Control Zone

1. Power:

Turns the computer on/off.

2. Full Screen:

Puts the media application into full screen.

3. AI Gear:

Changes modes for optimizing performance and quietness.

4. AI Nap:

Snoozing system without terminating tasks into quietest state.

5. AP-1/2 Trigger:

Initiates the pre-defined applications.

6. AP Menu:

Displays the application menu.

7. Media Control Zone:

Controls the media application.

Volume Up

Next

Previous

Volume Down

Play/Pause

Summary of Contents for P5B-PLUS













































































































































































Search results

Summary of Contents for P5B-PLUS

Reviews:

Related manuals for P5B-PLUS

Brands by name

Popular brands

Asus P5B-PLUS, User Manual

Search results

Summary of Contents for P5B-PLUS

Reviews:

Related manuals for P5B-PLUS

Brands by name

Popular brands