Asus P5B-PLUS User Manual Download Page 19

Page: 19 / 172

ASUS P5B-Plus Series

Serial ATA 3.0 Gb/s technology and SATA-On-The-Go

This motherboard supports the next-generation hard drives based on the Serial ATA

(SATA) 3Gb/s storage specification, delivering enhanced scalability and doubling

the bus bandwidth for high-speed data retrieval and saves. The external SATA port

located at the back I/O provides smart setup and hot-plug functions. Easily backup

photos, videos and other entertainment contents to external devices. See pages

2-25, and 2-28 for details.

Dual RAID solution

The Intel

ICH8R chipset incorporates six Serial ATA connectors with high

performance RAID 0, 1, 5 and 10 functions. The JMicron controller provides

another two Serial ATA connectors for RAID 0, 1, and JBOD functions. Making this

motherboard an ideal solution to enhance hard disk performance and data back up

protection without the cost of add-on cards. See pages 2-27 to 2-29 for details.

IEEE 1394a support

The IEEE 1394a interface provides high speed digital interface for audio/video

appliances such as digital television, digital video camcorders, storage peripherals &

other PC portable devices. See pages 2-24 and 2-30 for details.

S/PDIF digital sound ready

This motherboard provides convenient connectivity to external home theater audio

systems via coaxial and optical S/PDIF-out (SONY-PHILIPS Digital Interface) jacks.

It allows to transfer digital audio without converting to analog format and keeps the

best signal quality. See pages 2-26 and 2-34 for details.

High Definition Audio

Enjoy high-end sound quality on your PC! The onboard 8-channel HD audio (High

Definition Audio, previously codenamed Azalia) CODEC enables high-quality

192KHz/24-bit audio output, jack-sensing feature, retasking functions and multi-

streaming technology that simultaneously sends different audio streams to different

destinations. You can now talk to your partners on the headphone while playing

multi-channel network games. See pages 2-24 to 2-25 for details.

Summary of Contents for P5B-PLUS













































































































































































Search results

Summary of Contents for P5B-PLUS

Reviews:

Related manuals for P5B-PLUS

Brands by name

Popular brands

Asus P5B-PLUS, User Manual

Search results

Summary of Contents for P5B-PLUS

Reviews:

Related manuals for P5B-PLUS

Brands by name

Popular brands