Asus P5B-PLUS User Manual Download Page 107

Page: 107 / 172

ASUS P5B-Plus Series

4-37

Select Screen

Select Item

Enter Go to Sub Screen

F1 General Help

F10 Save and Exit

ESC Exit

BIOS SETUP UTILITY

Tools

O.C. PROFILE Configuration

O.C. Profile 1 Status : Not Installed

O.C. Profile 2 Status : Not Installed

Save to Profile 1

Load from Profile 1

Save to Profile 2

Load from Profile 2

Start O.C. Profile

Save to Profile 1

4.7.2

ASUS O.C. Profile

This item allows you to store or load multiple BIOS settings.

Save to Profle 1/2

Allows you to save the current BIOS file to the BIOS Flash. Press <Enter> to save

the file.

Load from Profile 1/2

Allows you to load the previous BIOS settings saved in the BIOS Flash. Press

<Enter> to load the file.

Start O.C. Profile

Allows you to run the utility to save and load CMOS. Press <Enter> to run the

utility.

ASUSTek O.C. Profile Utility V1.00

Current CMOS

Restore CMOS

Note

[Enter] Select or Load [B] Backup [ESC] Exit

[Tab] Switch [Up/Down/Home/End] Move

PATH:

A:\

BOARD:

P5B-Plus

VER:

0106

DATE:

11/23/06

BOARD:

Unknown

VER:

Unknown

DATE:

Unknown

• This function can support devices such as USB flash disks or floppy

disks with

FAT 32/16

format and single partition only.

• DO NOT shut down or reset the system while updating the BIOS to

prevent the system boot failure!

Summary of Contents for P5B-PLUS













































































































































































Search results

Summary of Contents for P5B-PLUS

Reviews:

Related manuals for P5B-PLUS

Brands by name

Popular brands

Asus P5B-PLUS, User Manual

Search results

Summary of Contents for P5B-PLUS

Reviews:

Related manuals for P5B-PLUS

Brands by name

Popular brands