manualshive.com logo in svg

Asus MAXIMUS VI GENE, User Manual

Share
Download
Asus MAXIMUS VI GENE User Manual Download Page 79

ASUS MAXIMUS VI GENE

2-17

Chapter 2

2.2 

BIOS update utility

USB BIOS Flashback

USB BIOS Flashback allows you to easily update the BIOS without entering the existing 

BIOS or operating system. Simply insert a USB storage device to the USB port, press the 

USB BIOS Flashback button for three seconds, and the BIOS is updated automatically.

To use USB BIOS Flashback:

1.   Download the latest BIOS file from the ASUS website

Download the latest BIOS file from the ASUS website

2. 

Extract and rename the BIOS image file to 

M6G.CAP

.

3. 

Copy 

M6G.CAP

 to the root directory of the USB flash disk drive.

4. 

Turn off the system and insert the USB storage device to the ROG Connect port.

5. 

Press the ROG Connect button and release when a flashing light appears, which 

indicates that the BIOS Flashback function is enabled.

6. 

Wait until the light goes out, indicating that the BIOS updating process is completed.

For more BIOS update utilities in BIOS setup, refer to the section 

Updating BIOS

 in 

Chapter 3.

• 

DO NOT unplug portable disk, power system, or press the CLR_CMOS button while 

BIOS update is ongoing, otherwise update will be interrupted. In case of interruption, 

please follow the steps again.

• 

Updating BIOS may have risks. If the BIOS program is damaged during the process

Updating BIOS may have risks. If the BIOS program is damaged during the process 

and results to the system’s failure to boot up, please contact your local ASUS Service 

Center.

ROG Connect 

button

USB BIOS Flashback port

Summary of Contents for MAXIMUS VI GENE

































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands