Asus MAXIMUS VI GENE, User Manual

Page: 42 / 192

1-28
Chapter 1: Product introduction
Chapter 1
3. MemOK! button
Installing DIMMs that are not compatible with the motherboard may cause system
boot failure, and the MEMOK_LED near the MemOK! switch lights continuously. Press
and hold the MemOK! button until the MEMOK_LED smemory compatibility tuning for MEMOK_LED smemory compatibility tuning for _LED smemory compatibility tuning for
successful boot.
• Refer to section 1.2.8 Onboard LEDs for the exact location of the MEMOK_LED. MEMOK_LED..
• The MEMOK_LED also lights up when the DIMM is not properly installed. Turn off the MEMOK_LED also lights up when the DIMM is not properly installed. Turn off the also lights up when the DIMM is not properly installed. Turn off the
system and reinstall the DIMM before using the MemOK! function.
• The MemOK! switch does not function under Windows
®
OS environment.
• During the tuning process, the system loads and tests failsafe memory settings. It
takes about 30 seconds for the system to test one set of failsafe settings. If the test
fails, the system reboots and test the next set of failsafe settings. The blinking speed
of the MEMOK_LED increases, indicating different test processes. MEMOK_LED increases, indicating different test processes. increases, indicating different test processes.
• Due to memory tuning requirement, the system automatically reboots when each
timing set is tested. If the installed DIMMs still fail to boot after the whole tuning
process, the MEMOK_LED lights continuously. Replace the DIMMs with ones MEMOK_LED lights continuously. Replace the DIMMs with ones lights continuously. Replace the DIMMs with ones
recommended in the Memory QVL (Qualified Vendors Lists) in this user manual or on
the ASUS website at www.asus.com.
• If you turn off the computer and replace DIMMs during the tuning process, the system
continues memory tuning after turning on the computer. To stop memory tuning, turn
off the computer and unplug the power cord for about 5–10 seconds.
• If your system fails to boot up due to BIOS overclocking, press the MemOK! switch
to boot and load the BIOS default settings. A message will appear during POST
reminding you that the BIOS has been restored to its default settings.
• We recommend that you download and update to the latest BIOS version from the
ASUS website at www.asus.com after using the MemOK! function.