Asus MAXIMUS VI GENE Page 126 User Manual Download

Page: 126 / 192

3-40

Chapter 3: BIOS setup

Chapter 3

3.6.8

APM

ErP Ready [Disabled]

Allows you to switch off some power at S4+S5 or S5 to get the system ready for ErP

requirement. When set to

[Enabled]

, all other PME options will be switched off.

Configuration options: [Disabled] [Enabled (S4��S5] [Enabled (S5)]

Restore AC Power Loss [Power Off]

[Power On]

The system goes into ON state after an AC power loss.

[Power Off]

The system goes into OFF state after an AC power loss.

[Last State]

The system goes into either OFF or ON state, whatever the system state

was before the AC power loss.

Power On By PCIE/PCI [Disabled]

[Disabled]

Disables the PCIE/PCI devices to generate a wake-on-LAN feature of the

Intel

/Realtek LAN device or other installed PCIE LAN devices.

[Enabled]

Enables the PCIE/PCI devices to generate a wake-on-LAN feature of the

PCIE LAN devices.

Power On By RTC [Disabled]

[Disabled]

Disables RTC to generate a wake event.

[Enabled]

When set to

[Enabled]

, the items

RTC Alarm Date (Days)

and

Hour/

Minute/Second

will become user-configurable with set values.

Summary of Contents for MAXIMUS VI GENE

































































































































































































Search results

Summary of Contents for MAXIMUS VI GENE

Reviews:

Related manuals for MAXIMUS VI GENE

Brands by name

Popular brands

Asus MAXIMUS VI GENE, User Manual

Search results

Summary of Contents for MAXIMUS VI GENE

Reviews:

Related manuals for MAXIMUS VI GENE

Brands by name

Popular brands