Asus MAXIMUS VI GENE User Manual Download

Page: 147 / 192

ASUS MAXIMUS VI GENE

3-61

Chapter 3

Select Yes and press <Enter>. When BIOS update is done, press <ESC> to exit BIOS

Updater. Restart your computer.

DO NOT shut down or reset the system while updating the BIOS to prevent system boot

failure!

•

For BIOS Updater version 1.04 or later, the utility automatically exits to the DOS

prompt after updating BIOS.

•

Ensure to load the BIOS default settings to ensure system compatibility and stability.

Select the

Load Optimized Defaults

item under the

Exit

BIOS menu. See Chaper 3

of your motherboard user manual for details.

•

Ensure to connect all SATA hard disk drives after updating the BIOS file if you have

disconnected them.

Summary of Contents for MAXIMUS VI GENE

































































































































































































Search results

Summary of Contents for MAXIMUS VI GENE

Reviews:

Related manuals for MAXIMUS VI GENE

Brands by name

Popular brands

Asus MAXIMUS VI GENE, User Manual

Search results

Summary of Contents for MAXIMUS VI GENE

Reviews:

Related manuals for MAXIMUS VI GENE

Brands by name

Popular brands