Asus MAXIMUS VI GENE User Manual Download

Page: 137 / 192

ASUS MAXIMUS VI GENE

3-51

Chapter 3

Click to start

the SSD Secure

Erase

Displays the

available

SSDs

Status definition:
Frozen

The frozen state is the result of a BIOS protective measure. The BIOS guards

drives that do not have password protection by freezing them prior to booting.

If the drive is frozen, a power off or hard reset of your PC must be performed to

proceed with the Secure Erase.

Locked

SSDs might be locked if the Secure Erase process is either incomplete or was

stopped. This may be due to a third party software that uses a different password

defined by ASUS. You have to unlock the SSD in the software before proceeding

with Secure Erase.

Summary of Contents for MAXIMUS VI GENE

































































































































































































Search results

Summary of Contents for MAXIMUS VI GENE

Reviews:

Related manuals for MAXIMUS VI GENE

Brands by name

Popular brands

Asus MAXIMUS VI GENE, User Manual

Search results

Summary of Contents for MAXIMUS VI GENE

Reviews:

Related manuals for MAXIMUS VI GENE

Brands by name

Popular brands