Asus MAXIMUS VI GENE User Manual Download Page 53

Page: 53 / 192

ASUS MAXIMUS VI GENE

1-39

Chapter 1

1.2.9

Internal connectors

Intel

Z87 Serial ATA 6 Gb/s connectors (7-pin SATA6G_1-6 [red])

These connectors connect to Serial ATA 6 Gb/s hard disk drives via Serial ATA 6 Gb/s

signal cables.
If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10

configuration with the Intel

Rapid Storage Technology through the onboard Intel

Z87

chipset.

•

These connectors are set to [

AHCI Mode

] by default. If you intend to create a Serial

ATA RAID set using these connectors, set the SATA Mode item in the BIOS to [

RAID

Mode

]. Refer to section

3.6.3 SATA Configuration

for details.

•

Before creating a RAID set, refer to section

5.1 RAID configurations

or the manual

bundled in the motherboard support DVD.

•

When using NCQ, set the SATA Mode in the BIOS to [

AHCI Mode

]. Refer to section

3.6.3 SATA Configuration

for details.

SATA 6 Gb/s port 5 will be disabled when M.2 slot on mPCIe Combo II is in use.

Summary of Contents for MAXIMUS VI GENE

































































































































































































Search results

Summary of Contents for MAXIMUS VI GENE

Reviews:

Brands by name

Popular brands

Asus MAXIMUS VI GENE, User Manual

Search results

Summary of Contents for MAXIMUS VI GENE

Reviews:

Brands by name

Popular brands