Asus Maximus V Extreme User Manual Download Page 209

Page: 209 / 246

ASUS MAXIMUS V EXTREME

5-11

Chapter 5

Find the

[HardwareIds.scsi.iaAHCI_DesktopWorkstationServer]

and

[HardwareIds.scsi.iaStor_DesktopWorkstationServer]

sections in the txtsetup.oem

file.

Type the following line to the bottom of the two sections:

id = “USB\VID_xxxx&PID_xxxx”, “usbstor”

Add the same line to both sections.

The VID and PID vary with different vendors.

10. Save and exit the file.

Use Notepad to open the file.

[HardwareIds.scsi.iaAHCI_

DesktopWorkstationServer]

id= “PCI\VEN_8086&DEV_1C02&CC_0106”,”iaStor”

id= “USB\VID_03EE&PID_6901”, “usbstor”

[HardwareIds.scsi.iaStor_

DesktopWorkstationServer]

id= “PCI\VEN_8086&DEV_2822&CC_0104”,”iaStor”

id= “USB\VID_03EE&PID_6901”, “usbstor”

Summary of Contents for Maximus V Extreme























































































































































































































































Search results

Summary of Contents for Maximus V Extreme

Reviews:

Related manuals for Maximus V Extreme

Brands by name

Popular brands

Asus Maximus V Extreme, User Manual

Search results

Summary of Contents for Maximus V Extreme

Reviews:

Related manuals for Maximus V Extreme

Brands by name

Popular brands