Asus Maximus V Extreme User Manual Download Page 48

Page: 48 / 246

1-32

Chapter 1: Product introduction

Chapter 1

1.2.8

Onboard LEDs

Hard Disk LED

The hard disk LED is designed to indicate the hard disk activity. It blinks when data

is being written into or read from the hard disk drive. The LED does not light up when

there is no hard disk drive connected to the motherboard or when the hard disk drive

does not function.

GO LED
Blinking

: Indicates that MemOK! is enabled before POST.

Lighting

: Indicates that the system loads the preset profile (GO_Button file) for

temporary overclocking when in OS.

Summary of Contents for Maximus V Extreme























































































































































































































































Search results

Summary of Contents for Maximus V Extreme

Reviews:

Related manuals for Maximus V Extreme

Brands by name

Popular brands

Asus Maximus V Extreme, User Manual

Search results

Summary of Contents for Maximus V Extreme

Reviews:

Related manuals for Maximus V Extreme

Brands by name

Popular brands