Asus Maximus V Extreme User Manual Download Page 215

Page: 215 / 246

ASUS MAXIMUS V EXTREME

6-5

Chapter 6

6.1.6

Installing the device drivers

Refer to the documentation that came with your graphics card package to install the device

drivers.

Ensure that your PCI Express graphics card driver supports the AMD® CrossFireX™

technology. Download the latest driver from the AMD website (www.amd.com).

6.1.7

Enabling the AMD

CrossFireX™ technology

After installing your graphics cards and the device drivers, enable the CrossFireX™ feature

through the AMD Catalyst™ Control Center in Windows environment.

Launching the AMD Catalyst Control Center

To launch the AMD Catalyst Control Center:

Right-click on the Windows

desktop and select

Catalyst Control Center

Click

Catalyst Control Center

to configure the

displays and settings of your AMD graphic cards.

Summary of Contents for Maximus V Extreme























































































































































































































































Search results

Summary of Contents for Maximus V Extreme

Reviews:

Related manuals for Maximus V Extreme

Brands by name

Popular brands

Asus Maximus V Extreme, User Manual

Search results

Summary of Contents for Maximus V Extreme

Reviews:

Related manuals for Maximus V Extreme

Brands by name

Popular brands