Asus Maximus V Extreme User Manual Download Page 137

Page: 137 / 246

ASUS MAXIMUS V EXTREME

3-41

Chapter 3

3.7

Boot menu

The Boot menu items allow you to change the system boot options.
Scroll down to display the other BIOS items.

Bootup NumLock State [On]

[On]

Sets the power-on state of the NumLock to [On].

[Off]

Sets the power-on state of the NumLock to [Off].

Full Screen Logo [Enabled]

[Enabled]

Enables the full screen logo display feature.

[Disabled]

Disables the full screen logo display feature.

Set this item to [Enabled] to use the ASUS MyLogo 2™ feature.

Post Report [5 sec]

This item appears only when you set Full Screen Logo to [Disabled]. This allows you to

select a desired post epot waiting time. The values range from 1 to 10 seconds.

Wait For ‘F1’ If Error [Enabled]

[Disabled]

Disables this function.

[Enabled]

The system waits for the <F1> key to be pressed when error occurs.

Summary of Contents for Maximus V Extreme























































































































































































































































Search results

Summary of Contents for Maximus V Extreme

Reviews:

Related manuals for Maximus V Extreme

Brands by name

Popular brands

Asus Maximus V Extreme, User Manual

Search results

Summary of Contents for Maximus V Extreme

Reviews:

Related manuals for Maximus V Extreme

Brands by name

Popular brands