Asus Maximus V Extreme User Manual Download Page 227

Page: 227 / 246

ASUS MAXIMUS V EXTREME

7-1

Chapter 7

Intel

technologies

7.1

Intel

2012 Desktop responsiveness technologies

This section details the overview of the installation and configuration procedures of the Intel®

2012 Desktop responsiveness technologies.
Intel

2012 Desktop responsiveness technologies feature the three technologies:

Intel

Smart Response Technology

Intel

Rapid Start Technology

Intel

Smart Connect Technology

System Requirements

In order for the system to run smoothly for the Intel

2012 Desktop responsiveness, your

system must meet the following requirements.

CPU:

Intel

3rd/2nd generation Core Processor family

OS:

Windows

7 operating systems

SSD:

One dedicated SSD (Solid State Disk) to support Intel

Smart Response and

Intel

Rapid Start Technology is necessary.

Refer to the

SSD Capacity Requirements

table for the information of SSD size,

partition capacity, and system memory requirements.

HDD:

At least one HDD (Hard Disk Drive) for the system OS drive.

DRAM:

To enable Intel

Rapid Start Technology, DRAM size smaller than 8GB is

required.

Ensure to enable the acceleration of Intel

Smart Response Technology

before creating

the partition for the Intel

Rapid Start Technology.

•
•
•

Chapter 7:

Intel

technologies

Summary of Contents for Maximus V Extreme























































































































































































































































Search results

Summary of Contents for Maximus V Extreme

Reviews:

Related manuals for Maximus V Extreme

Brands by name

Popular brands

Asus Maximus V Extreme, User Manual

Search results

Summary of Contents for Maximus V Extreme

Reviews:

Related manuals for Maximus V Extreme

Brands by name

Popular brands