Asus Maximus V Extreme User Manual Download Page 217

Page: 217 / 246

ASUS MAXIMUS V EXTREME

6-7

Chapter 6

6.2

NVIDIA

SLI™ technology

The motherboard supports the NVIDIA

SLI™ (Scalable Link Interface) technology that

allows you to install multi-graphics processing units (GPU) graphics cards. Follow the

installation procedures in this section.

6.2.1

Requirements

In SLI mode, you should have two identical SLI-ready graphics cards that are NVIDIA

certified.

Ensure that your graphics card driver supports the NVIDIA SLI technology. Download the

latest driver from the NVIDIA website at www.nvidia.com.
Ensure that your power supply unit (PSU) can provide at least the minimum power

required by your system.

•

We recommend that you install additional chassis fans for better thermal environment.

•

Visit the NVIDIA zone website (http://www.nzone.com) for the latest certified graphics

card and supported 3D application list.

6.2.2

Installing two SLI-ready graphics cards

The following pictures are for reference only. The graphics cards and the motherboard

layout may vary with models, but the installation steps remain the same.

1. Prepare two SLI-ready graphics cards.
2.

Insert the two graphics card into the PCIEX16 slots. If your motherboard has more than

two PCIEX16 slots, refer to Chapter 1 in

this user manual for the locations of the

PCIEX16 slots recommended for multi-

graphics card installation.

Ensure that the cards are properly

seated on the slots.

•

Summary of Contents for Maximus V Extreme























































































































































































































































Search results

Summary of Contents for Maximus V Extreme

Reviews:

Related manuals for Maximus V Extreme

Brands by name

Popular brands

Asus Maximus V Extreme, User Manual

Search results

Summary of Contents for Maximus V Extreme

Reviews:

Related manuals for Maximus V Extreme

Brands by name

Popular brands