Download the EVK-L2x software (and documentation)
from www.u-blox.com/evk-downloads and install the
software. See installation notes on back of card.
1. Insert SIM card in
SIM Card Holder
.
2. Connect two cellular antennas with SMA connectors
to the two
Antenna connectors
(SMA female).
3. Connect the GNSS antenna to the GNSS antenna
SMA connector, if GNSS functionality is required.
4. Connect power adapter to
9 – 18 V Power Input
connector (J400) (+12 V). LED DL401 is blue.
5. To supply power to the board, turn
Main Power
(SW400) switch to ON position. LED DL400 is green.
The module switches on.
Connection for communication via USB:
6. Connect USB cable to mini USB connector on the
adapter board (
cellular native USB
).
Quick Start EVK-L2x
2. Setup
Copyright © 2017, u-blox AG
1. Overview
1
2
5
4
6
UBX-14001665 - R03
3