TROUBLESHOOTING
37
Diagnostics
A diagnostic function is built into the Tabber's software.
Diagnostics
are accessed through the
Advanced
key. Pressing the
Diagnostic
key will start the tests in order. To bypass a test press
the
Next
key, to return to a test press the
EXIT
key.
Tests in order are:
1.
Voltage Test
–
Displays the voltages in
the power supply and logic.
When you click
Test ON
, V-1 should
be 12.0 volts for the main power supply.
V-2, V-3 and V-4 are voltages on the
logic board. Click
EXIT
to return to the
Voltage Test screen or
Next
to go to the
next test.
2.
Encoder Test
–
Tests if the Encoder is
working.
When you press
Test ON
, a number will
display in
“
Reading:
”
Rotate the Exit
Roller, if the number changes, the
Encoder is working. Press
Next
to
proceed to the next test.
