OPERATING THE TABBER
15
After 15 seconds*, if the Tabber isn't slowed
down,
Maximum Tabbing Rate Exceeded
screen appears and the Tabber will stop.
To restart, reduce Tabber speed and press
RUN
key on Control Panel.
*If the Tabber is slowed down
during
the
warning period it will switch back to the Run
Screen and continue to operate.
Running a Pre-Programmed Job
Up to four jobs may be programmed into the Tabber's memory. To run a pre-programmed job
release the
Emergency Stop Button
, then:
1.
Press the
Job #
soft key.
2.
Select the Job (1-4) you wish to run. In
our example, we are selecting Job #
2
using the soft
key 2.
3.
“
Select Option to Edit
”
screen appears.
Press
RUN
key on Control Panel to start
Tabber.
NOTE: To check the setup, press and
hold the INFO key on the Tabber
Control Panel and a screen appears
containing the settings and adjustments
for the job you are running.
