OPERATING THE TABBER
18
Version
The
Version
soft key displays the following:
Lifetime Products:
The total number of pieces transported through the system.
Lifetime Tabs:
Total number of Tabs/Stamps applied by the tab head.
BIOS Version:
Software version currently loaded into the Tabber.
BACK:
Returns you to the Advanced features screen.
Diagnostic
The diagnostic function is for use by the Technical Representative to diagnose possible problems
with the Tabber. Each screen performs a specific check of a function of the Tabber. It should
only be used by a trained technician. See
Diagnostics
at the end of the Troubleshooting Section.
Job # Key
When
Job #
soft key is pressed (
from Start-up
screen
), jobs that are already programmed and
saved can be selected.
Up to four jobs can be programmed into the
Tabber's memory. Any of the jobs can be
overwritten by simply reprogramming the Job #
you select with new parameters.
Once desired Job # is selected, the
“
Select Setup
Options
”
screen appears.
Manual
–
Selects the
Manual
Tab/Stamp
Positioning feature.
Automatic
–
Used to select the
Automatic
Tab Positioning feature.
V-Tab
–
Used to set the Tab Sensor Voltages
for your tab/stamp stock.
BACK
–
Returns to previous screen.
