ASTRO astrojet II plus, Installation And Operating Manual

Page: 49 / 62

45
AstroJet Image Blaster Printer
PROBLEM REASON REMEDY
No communication Improper cabling
Unit not receiving power
Use Proper cable (see Sect. 3)
Check plug connections, on/off
switch and fuse on back panel (see
Sect. 2)
Improper output (address inform-
ation out of order, misfeeding,
etc.) Wrong interface settings
Static electricity
Dirty media sensor
Check software or data base on PC
Turn AstroJet Image Blaster of and
on
Clean media sensor
Extra lines; losing data Data base problem Check data in data base program
Not printing on media Media not positioned properly 1. Adjust print band vertically
2. Adjust media margin setting on
AstroJet Image Blaster
Print too light or missing
character dots Clogged or dirty printheads
Running out of ink
Either purge or clean cartridges
Replace inkjet cartridges
Media jams Double feeding
Media is curled or bent
Media is too thin
Adjust feeder
Uncurl media
Media must be at least 0.008”
WARNING
DO NOT REMOVE THE SIDE COVERS OF THE ASTROJET PRINTER
THERE ARE HIGH VOLTAGES PRESENT BEHIND THE COVERS!