ASTRO astrojet II plus, Installation And Operating Manual

Page: 47 / 62

43
Section 6 –
Trouble Shooting Guide
The following trouble shooting guides are provided to assist you in solving any problems
that might occur with the AstroJet Image Blaster Printer or its software. We have tried
to make them as complete as possible. The best advice we can offer is to make sure
that the system is setup properly, plugged in, that it has an adequate supply of ink
before attempting to trouble shoot any problem.
Inkjet Cartridges
HP 51645A Print Cartridges
CONDITION PROBLEM SOLUTION
Cartridge will not print Sheet is blank even after it has
gone underneath cartridge(s).
•
Check to make sure the tape
is off the printhead
•
Remove and reinsert the
cartridge into the carriage
holder
•
Install a new print cartridge
White streaks in text or graphics
•
Re-insert the cartridge into
the carriage
•
Wet wipe and purge the
cartridge (There are clogged
nozzles.)
•
Clean interconnects
•
Insert a new Print Cartridge
Black streaks around text
•
Wet Wipe the cartridge
(There is ink buildup).