Premmia GL Series
77
Start-Up Beep Codes{xe "Beep codes"}
If an error occurs when you turn on the computer, you may hear a series of beeps
indicating a fatal error.
If you have installed an option card with its own ROM – for example a video card, this
may also produce beep codes, usually one long beep followed by others; check in the
option card user’s guide for details.
Beeps Explanation
1
Memory refresh failure.
Reseat or replace the memory modules (page 46).
2
Memory parity error.
Reseat or replace the memory modules (page 46).
3
Base 64K memory failure.
Reseat or replace the memory modules (page 46).
4
Timer not operational. Contact technical support.
5
Processor error.
Make sure the processor is installed correctly (page 62).
6
8042 - gate A20 failure. Make sure the keyboard is connected correctly.
7
Processor exception interrupt error. Make sure the processor is installed
correctly (page 62).
8
Display memory read/write failure.
If you are using the built-in video controller, you may need to replace the
motherboard. If you are using a video option card, make sure it is installed
correctly.
9
ROM checksum error Contact technical support.
10
CMOS shutdown register read/write error. Contact technical support.
11
Cache memory bad. Make sure the processor is installed correctly (page 62).
