Premmia GL Series
19
Using the Network to Turn On the Computer{xe "Wake on LAN"}{xe
"Network card"}{xe "LAN:Remote boot"}
Your computer supports the Wake On LAN standard that allows a network administrator to
start your computer remotely by sending a signal over the network to which your computer
is connected. To use Wake on LAN:
•
the installed network interface card must support Wake on LAN,
•
the card must be connected to the Wake On LAN connector on the motherboard (see
page 43 for more details),
•
Resume on LAN Header
in the
Power Management
menu of Setup must be enabled (see
page 70 for more details).
If you ordered your computer with an Ethernet card installed, it is set up to support Wake
on LAN.
Using the Modem to Turn On the Computer
Your computer supports the Wake On Ring standard that allows it to wake up when an
installed modem receives a phone call. To use Wake on Ring:
•
the installed modem card must support Wake on Ring,
•
the modem card must be connected to the Wake On Ring connector on the
motherboard (see page 43 for more details),
•
Resume on Ring Header
in the
Power Management
menu of Setup must be enabled (see page
69 for more details).
