Associated 12-1015 User Manual Download Page 56

Page: 56 / 56

56 -

Model 12-1015 Users’ Manual Version 13.08

Associated Equipment Corp.

5043 Farlin Ave.

800-949-1472(US)

St. Louis, MO 63115

314-385-5178 (Outside US)

•

Accident or neglect such as dropping the unit onto hard surfaces.

•

Contact with water, rain or extreme humidity.

•

Contact with extreme heat.

•

Cables that have broken, bent contact pins or subject to extreme

stress or wear.

•

Physical damage to the product surface including scratches, cracks

or other damage to the display screen or other externally exposed

parts.

14.2 - Limitations of Warranty

Other than the foregoing limited warranty, the manufacturer does not
make any other warranty or condition of any kind, whether express or
implied.

Any implied warranty of merchantability, or fitness for use shall be limited
to the duration of the foregoing limited warranty.

Otherwise, the foregoing limited warranty is the owner’s sole and
exclusive remedy and is in lieu of all other warranties whether express or
implied.

The manufacturer or any of its exclusive sales agents shall not be liable
for any consequential or incidental damages or losses arising of the loss
of uses of this product.

All warranty information, product features and specifications are
subjected to change without prior notice.

Summary of Contents for 12-1015

























































Search results

Summary of Contents for 12-1015

Reviews:

Related manuals for 12-1015

Brands by name

Popular brands

Associated 12-1015, User Manual

Search results

Summary of Contents for 12-1015

Reviews:

Related manuals for 12-1015

Brands by name

Popular brands