Associated 12-1015 User Manual Download Page 5 | Manualshive

Page: 5 / 56

background image

-

5 -

Model 12-1015 Users’ Manual Version 13.08

Associated Equipment Corp.

5043 Farlin Ave.

800-949-1472(US)

St. Louis, MO 63115

314-385-5178 (Outside US)

2.0 Safety Measures:

For safety reasons, read this manual thoroughly before operating the tool.

Always refer to and follow the safety instructions and testing procedures
provided by the car or equipment manufacturer. The safety messages presented
below and throughout this user’s manual are reminders to the operator to
exercise extreme care when using this test instrument.

2.1 Safety Precautions:

When the engine is running, it produces carbon monoxide,
a toxic and poisonous gas. Always operate the vehicle in a
well ventilated area. Do not breathe exhaust gases – they
are hazardous that can lead to death.

To protect your eyes from propellant object such as caustic
liquids, always wear safety eye protection.

Fuel and battery vapors are highly flammable.

DO NOT SMOKE NEAR THE VEHICLE DURING TESTING.

When engine is running, many parts (such as pulleys,
coolant fan, belts, etc) turn at high speed. To avoid serious
injury, always be alert and keep a safe distance from these
parts.

Before starting the engine for testing or trouble shooting,
always make sure the parking brakes is firmly engaged. Put
the transmission in Park (automatic transmission) and
Neutral (manual transmission).

Always block the drive wheels.

Never leave vehicle unattended while testing.

Never lay tools on vehicle battery. You may short the
terminals together causing harm to yourself, the tools or
the battery.

«
...
3
4
5
6
7
...
»

Summary of Contents for 12-1015

























































Reviews:

No comments

Related manuals for 12-1015

Brand: Yamaha Pages: 8

Brand: Bacharach Pages: 64

Brand: Kawai Pages: 19

Brand: Calculated Industries Pages: 64

SourceMeter 2400

Brand: Keithley Pages: 594

System SourceMeter 2601B

Brand: Keithley Pages: 864

Brand: Labgear Pages: 8

SourceMeter 2600B Series

Brand: Keithley Pages: 897

Brand: Underground Magnetics Pages: 48

Brand: Topcon Pages: 62

Brand: Barksdale Pages: 2

Brand: MICRO-EPSILON Pages: 82

Brand: Tektronix Pages: 116

Brand: sebaKMT Pages: 131

Brand: VECTECH Pages: 10

Brand: E+E Elektronik Pages: 48

Brand: Megasat Pages: 25

Brand: Thermocable Pages: 10

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands