Associated 12-1015 User Manual Download Page 12

Page: 12 / 56

12 -

Model 12-1015 Users’ Manual Version 13.08

Associated Equipment Corp.

5043 Farlin Ave.

800-949-1472(US)

St. Louis, MO 63115

314-385-5178 (Outside US)

Inside the Setup Menu (Fig.6), press to access the Language Menu (Fig.7).

Select the preferred language by pressing key to scroll to the item. Then

confirm it by pressing save. Once it had been saved, the display will change

to the language selected. Press key to exit and get back to the Main menu

screen (Fig.5) to continue your test.

6.0 – Help Key

This selection helps you to familiarize with the usage of the MODEL 12-1015 as

well as explaining the various test functions and its results. To get into this

function, just

Press key at any of the functions displayed on the menu screens as shown

below (Fig.8 and Fig 9):

Select Menu

New: Clear Memory

Continue Testing

View last Test

Setup Menu

Then press [Enter].

Figure 5

Setup Menu

Language

LCD Brightness

Printer

PC Link

[Enter] to proceed.

[Exit] to quit.

Select Language

English

Deutsch

Español

Français

[Enter] to save.

Figure 6

Figure 7

Summary of Contents for 12-1015

























































Search results

Summary of Contents for 12-1015

Reviews:

Related manuals for 12-1015

Brands by name

Popular brands

Associated 12-1015, User Manual

Search results

Summary of Contents for 12-1015

Reviews:

Related manuals for 12-1015

Brands by name

Popular brands