Associated 12-1015 User Manual Download Page 52

Page: 52 / 56

52 -

Model 12-1015 Users’ Manual Version 13.08

Associated Equipment Corp.

5043 Farlin Ave.

800-949-1472(US)

St. Louis, MO 63115

314-385-5178 (Outside US)

Step 4.

Now plug the Analyzer into any one of the PC USB port.

Step 5. On the PC, go to desktop display and look for icon.

Left click on the icon to open the program and the display page will

show as below:

Step 6.

Now link up the Analyzer with PC by the following procedures:

1. On the Main Menu page (Fig. 78) below, select Setup Menu by

pressing key to highlight it and then press key.

2. In the Setup Menu display (Fig. 79), press key to highlight

“PC Link” and then press key to activate.

Select Menu

New: Clear Memory

Continue Testing

View last Test

Setup Menu

[Enter] to proceed

Figure 78

Setup Menu

Language

LCD Brightness

Printer

PC Link

[Enter] to proceed.

[Exit] to quit.

Figure 79

Click here to input your
Company name and address.

Click here to select your
preferred language from the
list of languages shown.

It will automatically
detect the COM Port.
If you find that this
field is blank, close
the program, unplug
the analyzer cable
and then plug back
again. Repeat Step 5
to open the program.
The COM Port(s) will
now appear in the
drop down menu.

Summary of Contents for 12-1015

























































Search results

Summary of Contents for 12-1015

Reviews:

Related manuals for 12-1015

Brands by name

Popular brands

Associated 12-1015, User Manual

Search results

Summary of Contents for 12-1015

Reviews:

Related manuals for 12-1015

Brands by name

Popular brands