Assa Abloy Avolution S series Installation & Programming Manual Download Page 81

Page: 81 / 119

medical alarm is being used for some other purpose and you need to identify the correct type of alarm event you can
change the event code at this location.

OUTPUT DTMF CONTROL CODE NUMBER

OUTPUT DTMF CONTROL CODE NUMBER -

P175E 12E (Value 1-4 digit code 0-9999)

The panel can be configured to allow remote operation of the Outputs via a remote telephone. The code programmed at
this address is the DTMF code that must be used when performing this function. When dialling the panel and it has
answered the call, after waiting for the panel modem tones to stop you can enter in the 4 digit DTMF code plus the
Output number you wish to control, eg <1> for Output # 1, and the current status will be given of the Output associated
with the code entered. After that, if you press the “*” button on the telephone the status of the output will toggle eg if is

was previously On it will change to Off or vice versa. When finished you simply hang-up and 15 seconds later the panel
will release the line.

MICROPHONE ON/OFF DTMF CODE NUMBER

MICROPHONE ON/OFF DTMF CODE NUMBER -

P175E 13E (Value 1-4 digit code 0-9999)

The panel can be configured to allow remote listen-in via an on-site microphone. The Voice Board must be fitted for the
microphone feature to be available The code programmed at this address is the DTMF code that must be used when
turning the microphone On or Off. When dialling the panel and it has answered the call, after waiting for the panel
modem tones to stop you can enter in the 4 digit DTMF code plus the <*> button on the telephone. This will turn the

Microphone On. By Pressing the <*> button again the microphone will be turned Off. When finished you simply hang-up
and 15 seconds later the panel will release the line.

DIALLER ACKNOWLEDGE DTMF CODE NUMBER

DIALLER ACKNOWLEDGE DTMF CODE NUMBER -

P175E 14E (Value 1-4 digit code 0-9999)

If the panel is set to report in Domestic or Voice reporting formats, you can simply kiss-off (acknowledge) the alarm by
pressing the <#> button on the remote telephone. Alternatively if you require a more secure kiss-off method to ensure
that the alarm is only kissed off by the correct person you can program a 1-4 digit code at this location. If a code is
programmed at this location you must enter in the code followed by the <#> button to kiss-off the alarm event. This
code is also used in conjunction with the two way voice function. See also the instructions on Page 118

FORCE TEST CALL DTMF CODE NUMBER

FORCE TEST CALL DTMF CODE NUMBER -

P175E 15E (Value 1-4 digit code 0-9999)

If a user wishes to remotely force a test call from the panel to a monitoring company using the Contact ID test message,
you can dial the panel and when it answers enter the code programmed at this location on the telephone. If a voice
board is fitted you can assign a voice message (see P176E11E below) to indicate that the function was started. If no voice
board is fitted but there is a DTMF IC fitted to the panel you will get 3 short beeps after the code is entered to indicate the
function was started. Once you hang-up the phone the panel will then make a call to the monitoring company and send a
manual test call message. If no code is programmed at this location (ie “0”) the function will be disabled. The code can be

a 1-4 digit number as required.

NOTE: If using this remote test code and any of the other remote DTMF codes at locations (P63E, P175E12E, P175E13E &
P175E14E) you should make this code a 4 digit code to ensure the panel knows what function is being operated. If no
other DTMF remote functions are being used this code can be a single digit. It is also possible to force a locally generated
test call from the panel keypad by pressing and holding the <CONTROL> button then <0> within two seconds of

pressing control. This will force a test call to the monitoring company.

MISCELLANEOUS VOICE BOARD REPORT

MESSAGES

KEYPAD or RADIO PANIC ALARM VOICE MESSAGE NUMBER -

P176E 1E (Value 0-99)

FIRE ALARM VOICE MESSAGE NUMBER -

P176E 2E (Value 0-99)

MEDICAL ALARM VOICE MESSAGE NUMBER -

P176E 3E (Value 0-99)

MAINS FAIL ALARM VOICE MESSAGE NUMBER -

P176E 4E (Value 0-99)

MAINS RESTORE VOICE MESSAGE NUMBER -