Asko 000 Series, Training Manual

Page: 59 / 89

Variant menu DW 20.5
Main power switch
If the control unit is replaced, the machine will automatically be in the variant setting menu when the power
supply is switched on for the first time.
Fill the machine with approx. 1 liter of water.
Press the program button repeatedly until the desired variant is selected. There are two choices ( 1): Express
option. ( 2): 3 in 1 option. Choose 1 . Confirm choice by pressing Start. The machine senses the presence of
the turbidity and pressure sensors and the spray arm divider,
The program then reverts back to the main menu.
55
Once the control board variant has been set, it is still possible to return to the variant menu and change it again. (useful if it has been programmed
incorrectly). To do so, turn off the main power switch. Wait at least 5 seconds, Press and hold the Program and Start buttons, turn on the main
power switch, wait a second then release the Program and Start buttons, then within 5 seconds press the Start button 3 times in quick
succession. Use the Program button to select a different variant. Confirm by pressing the Start button. Program returns to the main menu.