Asko 000 Series, Training Manual

Page: 55 / 89

Variant menu DW 20.4
Main power switch
If the control is replaced the machine will automatically be in the variant setting menu when the
power is switched on for the first time. Fill the machine with approx. 1 liter of water. Press the
program button repeatedly until the desired variant is selected .
Variant 1: Variant with Menu/Set.
Variant 2: Variant with Temperature/Drying selection. Choose Variant 1: Confirm choice by pressing
the start button or the menu button. The machine will now sense the presence of the turbidity and
pressure sensors and the spray arm divider. The program then reverts back to the main menu.
Access to Special settings menu
Turn off the main switch, wait at least 5 seconds. Keep Set button depressed. Turn on the main
switch, then release Set button. Select the status with Set button, proceed with menu button.
Language can be changed, child lock, acoustic signal volume etc.
51
Once the control board variant has been set, it is still possible to return to the variant menu and change it again. (useful if it has been
programmed incorrectly). To do so, turn off the main power switch. Wait at least 5 seconds, Press and hold the Program and Start buttons, turn
on the main power switch, wait a second then release the Program and Start buttons, then within 5 seconds press the Start button 3 times in
quick succession. Use the Program button to select a different variant. Confirm by pressing the Start button. Program returns to the main menu.