Asko 000 Series, Training Manual

Page: 46 / 89

Service menu DW 20.1
The only thing that can be changed in the service menu of the 20.1 units is the water intake. It can be
changed from flow meter fill, to timed fill. To activate the service menu – turn off the main power
switch. Wait for at least 5 seconds, keep the program and start buttons depressed, then turn on the
main switch, then release the program and start buttons. The program button, the start button and L7
flashes. The water intake can now be adjusted by pressing the program button once again. L7 will be
flashing continuously during this operation. If L1 is extinguished the water is controlled by the flow
meter, if it is lit the water is controlled by time. Confirm the choice by pressing the start button. The
program will return to the main menu.
Main power switch
Although the controls for
each model may be on the
front of the machine or on
the top of the door. The
main power switch is
always on the top of the
door on the far left side
Before entering the service menu always
cancel the currently selected program first,
by pressing the power button to turn the unit
on then holding down the start/stop button
for three seconds.
42