ASG, Division of Jergens, Inc.
15700
S. Waterloo Road | Cleveland, OH 44110-3898 | Phone: (888) 486-6163 | Fax: (216) 481-4519 | Email: [email protected] | Web: www.asg-jergens.com
9
Adjustments and Checks before Use (Continued)
Picking Up Screws
• With screwdriver on the robot, pick up the screws at the stopper.
• Use the bit guide to guide the screwdriver bit vertically onto the screwhead.
• When inserting the screwdriver onto the screwhead, do not use excessive force as
it may alter the position of the escape or cause damage to the machine.
• Use the correct bit for the size of screw you are using.
Action of the Escape
• The escape rotates 90° clockwise, stops for 0.6 seconds, and rotates again 90°
clockwise. When a screw is caught in the escape and the notch position is altered,
the escape automatically rotates to the left to reestablish its position It will then
return to the correct rotation.
• This machine continues its operation when no screw is found at the screw pick up
location.
• The machine continues operating with a screw at the pick up location but will
stop after a certain period of time if the screw is not picked up.
• Once the screw is picked up, the machine starts operating again. This time period
can be varied by adjusting the timer.
• When no screw is found at the pick up location after a certain period of time, the
rail vibration increases. The vibration sound will also increase.
• If a screw is not found at the pick-up location, the machine stops operating. At
this time, the escape keeps rotating. Turn the power switch OFF and ON again
when you want to restart operation.
