manualshive.com logo in svg

Asco ASCOJET 1505, Instruction Manual, Page: 55 / 93

Share
Download
Asco ASCOJET 1505 Instruction Manual Download Page 55

ASCO CARBON DIOXIDE LTD

 

Offi cial sales partner USA

Industriestr. 2, CH-8590 Romanshorn 

 

GRAND NORTHERN PRODUCTS

Tel. +41 71 466 80 80  Fax + 41 71 466 80 66 

 

Tel. + 001 616 583 50 00  Fax + 001 616 583 90 61

[email protected]

/www.ascoco2.com

 

[email protected]/www.grandnorthern.com

ASCO

CARBON DIOXIDE LTD

35

6 

TROUBLESHOOTING

WARNING

Risk of accident while working on the appliance. Carry out all the steps descri-
bed in the chapter „Shut down“ before starting any work on the device.

WARNING

Risk of cold burns on account of dry ice or cold parts of the machine. While wor-
king on the machine, wear appropriate safety gear for protection against cold or 
remove dry ice and let the machine heat up.
Never put dry ice in your mouth.

6.1 

FAULTS WITH DISPLAY

Display

Possible lamp 
(KL)

Possible cause

Solution

By 
whom

E001

KL control vol-
tage glows red

Control voltage too low.

Turn off the appliance, wait 
briefl y, turn on the appliance 
once again.
Have the socket checked.
If this error recurs, please 
contact the Customer Ser-
vice.

Operator

E002

KL emergency 
Stop glows red

Emergency-stop button 
has been pressed.

Release emergency-stop 
button by turning.

Operator

E003

KL com-
pressed air 
glows red

Pressure of the com-
pressed air supply too 
low.

Increase the pressure.
Turn off the appliance, wait 
briefl y, turn on the appliance 
once again.

Operator

E004

KL feeding 
glows red

Interference in the fee-
ding.

Turn off the appliance, wait 
briefl y, turn on the appliance 
once again.
If this error recurs, please 
contact the Customer Ser-
vice.

Operator

E005

KL blasting gun 
glows red

Connection between the 
device and the jet pistol 
is faulty.

Check for correct connec-
tion of the couplings in the 
control line. Check control 
cable for damages.

Operator

Summary of Contents for ASCOJET 1505






























































































Reviews:

No comments