Asco ASCOJET 1505 Instruction Manual Download Page 51 | Manualshive

Page: 51 / 93

Asco ASCOJET 1505 Instruction Manual Download Page 51

ASCO CARBON DIOXIDE LTD

Ofﬁ cial sales partner USA

Industriestr. 2, CH-8590 Romanshorn

GRAND NORTHERN PRODUCTS

Tel. +41 71 466 80 80 Fax + 41 71 466 80 66

Tel. + 001 616 583 50 00 Fax + 001 616 583 90 61

[email protected]

/www.ascoco2.com

[email protected]/www.grandnorthern.com

ASCO

CARBON DIOXIDE LTD

31

5

MAINTENANCE

5.1

MAINTENANCE INSTRUCTIONS

The basis of a safe operation of the equipment is the regular maintenance according
to the following maintenance plan. Use exclusively original parts of the manufacturer or
those parts recommended by him like:

•  parts and wearing parts,
•  accessories,
•  operating material,
•  cleaning agents.

WARNING

Risk of accident while working on the appliance. Carry out all the steps descri-
bed in the chapter „Shut down“ before starting any work on the device.

WARNING

Risk of cold burns on account of dry ice or cold parts of the machine. While wor-
king on the machine, wear appropriate safety gear for protection against cold or
remove dry ice and let the machine heat up.
Never put dry ice in your mouth.

CAUTION

Risk of damage. Do not use solvents, petrol or oil-based cleaners to clean the
blasting gun.

5.2

MAINTENANCE SCHEDULE

5.2.1 Daily before starting operations

• Check the transport hose for damages, bends and other damages. Soft areas in the

hose indicate wear on the inner side of the hose. Replace the defective or worn out
hose with a new hose.

• Check electrical cable and plug for damages. Get defective parts replaced by Cus-

tomer Service.

«
...
49
50
51
52
53
...
»

Summary of Contents for ASCOJET 1505






























































































Reviews:

No comments