manualshive.com logo in svg

Asco ASCOJET 1505, Instruction Manual, Page: 38 / 93

Share
Download
Asco ASCOJET 1505 Instruction Manual Download Page 38

ASCO CARBON DIOXIDE LTD

 

Offi cial sales partner USA

Industriestr. 2, CH-8590 Romanshorn 

 

GRAND NORTHERN PRODUCTS

Tel. +41 71 466 80 80  Fax + 41 71 466 80 66 

 

Tel. + 001 616 583 50 00  Fax + 001 616 583 90 61

[email protected]

/www.ascoco2.com

 

[email protected]/www.grandnorthern.com

ASCO

CARBON DIOXIDE LTD

18

3 

INSTALLATION

•  Attach and secure the other end of the hose bundle with the gun in the same way. 

Connect the control cable to the machine and the pistol. 

•  Connect the 

ASCOJET

 to the compressed air source. The compressed air source 

may be a local compressed air system or a portable compressor. The connection 
threading on the 

ASCOTJET

 is ¾" NPT inside threading.

NOTE

Optional connection method: To facilitate quick coup-
ling and decoupling, we recommend the use of a claw 
coupling with a safety ring to protect against inadver-
tent release of the connection (see Fig. 3).

Fig. 3

WARNING

Connect  the 

ASCOJET

  to  the  electrical  power  supply.  For  the  technical  data 

please refer to the technical data sheet chapter 1.10.
The 

ASCOJET

 is now ready for blasting operations.

CAUTION

Make sure that the blasting hose is not crimped.
Make sure that electrical connections are protected against contact with mois-
ture or water. 
Compressed air to 

ASCOJET

 pressure must not exceed 232 psi (16 bar).

CAUTION

Make sure that all protective devices are in function and all protective covers 
are mounted (see picture below).

Summary of Contents for ASCOJET 1505






























































































Reviews:

No comments