Asco ASCOJET 1505 Instruction Manual Download Page 44 | Manualshive

Page: 44 / 93

Asco ASCOJET 1505 Instruction Manual Download Page 44

ASCO CARBON DIOXIDE LTD

Ofﬁ cial sales partner USA

Industriestr. 2, CH-8590 Romanshorn

GRAND NORTHERN PRODUCTS

Tel. +41 71 466 80 80 Fax + 41 71 466 80 66

Tel. + 001 616 583 50 00 Fax + 001 616 583 90 61

[email protected]

/www.ascoco2.com

[email protected]/www.grandnorthern.com

ASCO

CARBON DIOXIDE LTD

24

4

OPERATION

4.3

SETTINGS

NOTE

The settings depend on the surface to be cleaned and the type of contaminati-
on.

• Release emergency-stop button by turning.
• Increase/reduce the air pressure by using the respective regulators.

NOTE

The higher you set the air pressure, the greater (more aggressive) will the
cleaning effect be.

• Increase/reduce the dry ice feeding by using the respective regulators.

4.4

OPERATION

• Carry out maintenance jobs „daily before starting work“ (see section „Maintenance

and Care“).

WARNING

Risk of injury on account of ﬂ ying dry ice pellets. Do not point head of the blas-
ting gun on persons. Keep third persons away from the place of use and when
the machine is being operated (by cordoning off the area).
Do not touch/hold the nozzles opening while the machine is running. First stop
the compressed air supply before disconnecting the gun from the hose and the
hose from the device; remove all pressure from the system and then disconnect
the plug from the socket.

• Cordon off the working area to prevent persons coming close to the machine when

it is being operated.

«
...
42
43
44
45
46
...
»

Summary of Contents for ASCOJET 1505






























































































Reviews:

No comments