Users can click
Operate
and select
Modify IP
in the drop-down list, and a dialog box presents itself as
shown below. Input the new NMS IP Address for the device and click the
OK
button to confirm.
The indicator light will turn red, which means the equipment has disconnected. Users can then refer to
the below prompts to edit the property by inputting the new IP to reconnect the equipment.
Input the new IP Address in the box and click the
OK
button to reconnect the device.
Solutions Provider for FTTx, RFoG and HFC www.ascentcomtec.com
Page 40 of 43
