Set:
Activates the current parameters shown in the SNMP software.
Get:
Reads the current device’s activating parameters and shows them in the SNMP software.
IP Out Enable
Check the checkbox to enable IP output. Users can modify the IP address here as well.
IP Out Address/Service IP Address/Service Mask/Service Gateway
Users can set the address by modifying the values in these four fields.
ASI Output Channel
This device supports 1 MPTS (Multiple Programs Transport Stream) or 4 SPTS (Single Programs
Transport Stream) outputs. User can click
to to select the output type from a drop-down list.
Output Port
Set the output port by modifying the value in this field.
Original Network ID
This 16-bit field gives the label identifying the network ID of the originating delivery system. The value
ranges from 0 to 0xFFFF.
Transport Stream ID
This 6-bit field serves as a label for identification of this TS from any other multiplex device within the
delivery system. The value ranges from 0 to 0xFFFF.
Output Bit Rate (Mbps)
This includes the effective bitrate of encoding channels 1-8, the effective bitrate from the ASI input, and
the bitrate of stuffed null packets.
UDP Stream TS Package
Users can set the amount of TS packages here.
Solutions Provider for FTTx, RFoG and HFC www.ascentcomtec.com
Page 31 of 43
