：
The Descriptor Data is the detailed information of the private description.
：
Users can add the cable transmission descriptor by clicking this
Add
button. The
following dialogue box should pop up, confirming that the added descriptor has been applied for the
DVB-C network.
The interface will be shown as below after the NIT parameters have been added
：
：
The
Modify
button will open a window allowing users to modify selected items in the
NIT.
：
The
Delete
button will remove the selected items in the NIT.
：
The
Set
button will send the NIT to the chosen output Port.
A real-time bit rate chart will be generated in the monitor for users to check the bit rate information.
Solutions Provider for FTTx, RFoG and HFC www.ascentcomtec.com
Page 38 of 43
