Refresh:
Retrieves the PID filter table from the device
Confirm:
Submits the PID filter table to the device
Check all:
Selects all items on the list
After a PID in the table is selected, the corresponding output PSI/SI table will not be sent to the output
stream.
4.3.3.2
PID Pass
Users can choose to bypass input PID in this interface.
Occasionally, there are PIDs which won’t belong to any program, such as EPG, NIT tables, and so on, but
users might want to pass them through the multiplexing module without changing anything. That is the
main purpose of this function.
The display will be shown as below when user clicks the
button.
Solutions Provider for FTTx, RFoG and HFC www.ascentcomtec.com
Page 35 of 43
