Choose the connected equipment type in the
Equipment Type
drop down list by clicking the
“
▼
” Or clicking “
?
” to auto-search for the type of device.
Note
1.
The default IP of the EC2400 HD Encoder is 192.168.2.136. You can check
its IP address in the front panel of the device in case the IP has changed.
2.
The PC IP address and device IP address should be in the same network.
For example: if the Device IP is 192.168.2.136 and the sub mask is
255.255.255.0, the PC IP address should be 192.168.2.X (1<X<255) and the
sub mask should be 255.255.255.0. Users can use a ping command to
confirm whether or not these two are in same network.
1. The default IP of the EC2400 HD Encoder is 192.168.2.136. You can check its IP address in the front
panel of the device in case the IP has changed.
2. The PC IP address and device IP address should be in the same network. For example: if the Device IP
is 192.168.2.136 and the sub mask is 255.255.255.0, the PC IP address should be 192.168.2.X (1<X<255)
and the sub mask should be 255.255.255.0. Users can use a ping command to confirm whether or not
these two are in same network.
Click
OK
and the following screen should appear:
Solutions Provider for FTTx, RFoG and HFC www.ascentcomtec.com
Page 28 of 43
