First find the HDMI or SDI interface on the device according to the connector mark described on the
rear panel illustration in section 1.6, and then connect the HDMI or SDI cable (in the accessories). One
end is connected to the head-end equipment and the other end to the encoder’s HDMI or SDI input
port. The encoder’s HDMI or SDI input port and its connection are illustrated as follows:
User can find the ASI output interface on the device according to the connector mark described on the
rear panel illustration in section 1.6, and then connect the ASI cable (in the accessories). One end is
connected to the encoder’s ASI out connector (ASI out1, ASI out2) abd the other end to the TS stream
multiplexer or modulator’s ASI input port. The encoder’s ASI output interface and its connection are
illustrated as follow:
Solutions Provider for FTTx, RFoG and HFC www.ascentcomtec.com
Page 11 of 43
