The programs in the left column represent all input programs and which port they come from, while the
programs in the right column represent the output programs and which port they are from. Users can
parse the programs of each channel and multiplex those programs to the output. Users can also modify
the output programs’ Program Name, PMT, PCR, video, and audio PID.
: Check this box the set the PID Mapping
: Refreshes the input terminal and retrieves the input information
: Refreshes the output terminal and retrieves the output information
: Multiplexes the input programs to the output channels after selecting the target program
with . The system will automatically allot the programs to the relevant output channel.
: Cancels the multiplexed programs.
: Modifies the output programs’ Program Name, PMT, PCR, video, or audio PID as needed.
To modify program information, users can select the target program in the output section and click this
button to pop up a dialog box as shown below:
CH01-CH04: The 4
HDMI or SDI
Encoding Channels
CH05: The ASI Input Channel
Solutions Provider for FTTx, RFoG and HFC www.ascentcomtec.com
Page 33 of 43
