The grounding wire conductive screw is located at the right end of the rear panel, and the power
switch, fuse, and power supply socket are right next to that. The power switch is on the left, the power
supply socket is on the right, and the fuse is between them.
Connecting Power Cord
Insert one end into the power supply socket, and insert the other end to an AC power source.
Connecting Grounding Wire
The grounding resistance should be less than
1Ω.
Caution
Before connecting power cord to EC 2400 4-in-1 MPEG-4 AVC/H.264 HD
Encoder, user should set the power switch to “OFF.”
The signal connections include the input signal cable and the output signal cable. The cables look like
the following:
Solutions Provider for FTTx, RFoG and HFC www.ascentcomtec.com
Page 10 of 43
