Description of the safety signs on the device
9
I G00014799
Risk of injury due to rotating parts.
Keep your hands away from rotating parts.
J G00014798
Burn hazard from hot surfaces.
Do not touch the engine or the muffler. They get very hot dur-
ing operation.
K G00014805
Fig. 4:
Fire and explosion hazard.
Press the start-stop switch on the Remote Control Transmit-
ter and remove it before refueling. Then switch off the main
switch.
Keep fuel away from ignition sources and do not smoke dur-
ing handling.
N G00014843
Risk of tipping.
While in ride-on operation (MC), do not use the device on
slopes.
O G00014842
Risk of tipping.
In remote control mode (RC), do not pause below the device
on slopes.
L G00014804
Fig. 5:
Warning sign of the engine manufacturer on the engine. Ob-
serve the information in the operator’s manual of the engine
manufacturer.
Q G00014783
Clean ventilation grid!
The cooling air of the engine is sucked in through the ventila-
tion grid of the engine cover. Always keep the entire surface
free and open.
R G00014853
BEI SCHWEISSARBEITEN ABSTECKEN
DISCONNECT BEFORE WELDING
AVANT SOUDAGE, DÉCONNECTER LE RÉCEPTEUR
ANTES DE SOLDAR, DESCONECTAR
G00014853
Fig. 6:
When carrying out welding work, disconnect the receiver!
When carrying out welding work, disconnect the receiver of
the remote control.
Summary of Contents for AS 940 SHERPA 4WD RC
Page 56: ......
