AS MOTOR AS 940 SHERPA 4WD RC Operator'S Manual Download

Page: 39 / 56

Maintenance

Release the drive lever Does the device stop when the lever is in neutral posi-

tion (parking brake)?

Does the lever in MC mode move to neutral position
when the brake pedal is activated?

Does the drive lever in the MC mode move to neutral
position when the driver leaves the seat?

Bowden cables

Check for proper function and ease of movement.

Acceleration lever

Check for proper function.

Chassis and protective
devices

Check for rust and fissures and check the welding
seams.

Are all protective devices and covers in place, fastened
correctly and properly functioning?

Label

Check for proper condition and completeness.

Engine

For reliable information, see the operating manual of the
engine manufacturer.

Check oil level (see operator’s manual of the engine
manufacturer).

Parking brake

Check.

Flammable material

Remove easily flammable debris buildup from the en-
gine and the device.

Steering

Check the clearance in the MC mode.

Tires

Check tires and, if necessary, the tire pressure.

Hydrostatic transmis-
sion

Check oil level.

Yearly or every 50 h by the authorized service center

Component

Action

When the engine

is not running

When the en-

gine is running

Device

Clean.

Carrying out basic inspection.

Checking the RC functions.

Checking the safety functions.

Tank,fuel valve, and
fuel line

Check parts for leaks and check for good condition.

Ventilation grid

Clean.

Engine cooling

Clean.

Spark plug

Check/replace.

Air filter

Wait.

Blade and fastening
components

Check for wear and damage. See chapter Checking the
blade.

Change.

Blade brake clutch

Does the blade brake clutch function safely and does
the blade come to a standstill within 5 seconds?

Release the drive lever Does the device stop when the lever is in neutral posi-

tion (parking brake)?

Does the lever in MC mode move to neutral position
when the brake pedal is activated?

Does the drive lever in the MC mode move to neutral
position when the driver leaves the seat?

Summary of Contents for AS 940 SHERPA 4WD RC

























































Search results

Summary of Contents for AS 940 SHERPA 4WD RC

Reviews:

Related manuals for AS 940 SHERPA 4WD RC

Brands by name

Popular brands

AS MOTOR AS 940 SHERPA 4WD RC, Operator'S Manual

Search results

Summary of Contents for AS 940 SHERPA 4WD RC

Reviews:

Related manuals for AS 940 SHERPA 4WD RC

Brands by name

Popular brands