3.6.2. The Arpeggiator
The MiniBrute 2S is in Sequencer mode by default. But you can switch to Arpeggiator mode
instantly by pressing the On button in the Arp/Loop section of the top panel. It looks like this:
Before you play the pads, let's configure the Arpeggiator so we'll be hearing the same thing.
So hold down the Shift button and then:
• Tap the "F" pad ("1/8")
• Tap the "G#" pad ("Chrom")
Now hold the Arp/Loop On button and turn the Tempo/Value knob until you see the word
"Up" in the display.
We'll explain what those settings mean in the
Seq / Arp: shared features [p.83]
chapter.
Now hold down at least 3 pads. You should hear those three notes repeated in order from
lowest to highest. If nothing happens, check the setting of the
again.
For a more lengthy explanation of what an Arpeggiator is, see the
chapter. If you're curious about the more advanced Arp/Looper features,
.
The Arp/Loop section
18
Arturia - User Manual MiniBrute 2S - Quick Start
Summary of Contents for MINIBRUTE 2S
Page 1: ...USER MANUAL...