14.7.2. Sequence settings
Here’s a quick reference chart for the Pattern settings:
Parameter
Range/Values
Description/Function
Metronome
Resolution
1/4, 1/8, 1/16, 1/32
Selects the resolution for the metronome
Global Tempo
Off, On, Paused
Off: Pattern tempos are independent
On: Overrides pattern tempos
Paused: Waits to change tempo when a pattern is loaded during
playback
Sync Clock In/
Out settings
1step
(Gate/Clock),
1pulse, 24ppq, 48 ppq
Set Sync input/output type. Refer to external device
documentation to determine what the settings should be.
Next Seq
Wait to Load, Instant
Change
Selects when the MiniBrute 2S patterns will change
Fixed Velocity
Mode
Off, On
Disable/enable velocity sensitivity
Fixed Velocity
Value
0-127
Set the preferred value
Tap Tempo
2, 3, or 4 taps
Number of taps to respond
LFO1
Key
Retrig
Disable, Enable
LFO will run freely or retrigger when a note is played
LFO2
Key
Retrig
Disable, Enable
LFO will run freely or retrigger when a note is played
Master Swing
1/8, 1/16, 1/32
Sets resolution for the swing value
Next we’ll go through those parameters one-by-one.
14.7.2.1. Metronome Resolution
This parameter allows you to select how quickly the metronome will count. If your tempo is
slow, a higher resolution may be preferred. If your tempo is fast, a lower resolution such as
1/4 might be best.
150
Arturia - User Manual MiniBrute 2S - MIDI Control Center
Summary of Contents for MINIBRUTE 2S
Page 1: ...USER MANUAL...
